Keithley 2461, Справочное руководство, Страница: 978 / 1109

Model 2461 Interactive SourceMeter® Instrument Reference Manual Section 8: TSP command reference
2461-901-01 A/November 2015 8-305
To use the timer as a simple delay or pulse generator with digital I/O lines, make sure the timer start
time in seconds and fractional seconds is configured for a time in the past. To use the timer as an
alarm, configure the timer start time in seconds and fractional seconds for the desired alarm time.
Example
trigger.timer[3].enable = trigger.ON
Enable the trigger timer for timer 3.
Also see
None
trigger.timer[N].reset()
This function resets trigger timer settings to their default values.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
trigger.timer[ N ].reset()
N
Trigger timer number (1 to 4)
Details
The
trigger.timer[ N ].reset()
function resets the following attributes to their default values:
•
trigger.timer[ N ].count
•
trigger.timer[ N ].delay
•
trigger.timer[ N ].delaylist
•
trigger.timer[ N ].enable
•
trigger.timer[ N ].start.generate
•
trigger.timer[ N ].start.fractionalseconds
•
trigger.timer[ N ].start.seconds
•
trigger.timer[ N ].stimulus
It also clears
trigger.timer[ N ].overrun
.
Example
trigger.timer[1].reset()
Resets the attributes associated with timer 1 to
their default values.
Also see
trigger.timer[N].count (on page 8-301)
trigger.timer[N].delay (on page 8-303)
trigger.timer[N].delaylist (on page 8-303)
trigger.timer[N].enable (on page 8-304)
trigger.timer[N].start.fractionalseconds (on page 8-306)
trigger.timer[N].start.generate (on page 8-306)
trigger.timer[N].start.overrun (on page 8-307)
trigger.timer[N].start.seconds (on page 8-308)
trigger.timer[N].start.stimulus (on page 8-308)