Keithley 2461 Скачать руководство пользователя страница 389

Страница: 389 / 1109

Section 6: SCPI command reference

Model 2461 Interactive SourceMeter® Instrument Reference Manual

6-12

2461-901-01 A/November 2015

:READ:DIGitize?

This query makes a digitize measurement, places it in a reading buffer, and returns the latest reading.

Type

Affected by

Where saved

Default value

Query only

Not applicable

Usage

:READ:DIGitize?

:READ:DIGitize? "<bufferName>"

:READ:DIGitize? "<bufferName>", <bufferElements>

The name of the buffer where the reading is stored; if nothing is specified,

defbuffer1

is used

See

Details

; if nothing is specified,

READing

is used

Details

You must set the instrument to a digitize function before sending this command.
This query makes the number of readings specified by

[:SENSe[1]]:DIGitize:COUNt

. If multiple

readings are made, all readings are available in the reading buffer. However, only the last reading is

returned as a reading with the command. To get multiple readings, use the

:TRACe:DATA?

command.
When specifying buffer elements, you can:

•

Specify buffer elements in any order.

•

Include any or all of the buffer elements listed below in a single list. You can repeat elements as

long as the number of elements in the list is less than 14.

•

Use a comma to delineate multiple elements for a data point.

Содержание 2461






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2461

Отзывы:

Keithley 2461, Справочное руководство, Страница: 389 / 1109

Результаты поиска

Содержание 2461

Отзывы: