manualshive.com logo in svg

Keithley 2302, Инструкция по эксплуатации, Страница: 97 / 348

Поделиться
Скачать
Keithley 2302 Скачать руководство пользователя страница 97

•

Overview

 — Provides an overview of the long integration measurement process. 

•

Measurement configuration

 — Explains how to configure the instrument for long 

integration measurements. 

•

Long integration measurement procedure

 — Provides the step-by-step procedure to per-

form long integration measurements from the front panel. 

•

SCPI programming

 — Documents the commands used to program the instrument for 

long integration measurements including FAST, SEARch and DETect usage. 

•

Programming examples

 — Include programming examples to perform long integration 

measurements. 

NOTES

This manual covers Keithley Models 2302, 2302-PJ, 2306, 2306-PJ, and 2306-VS 
simulators (power supplies). Since the Model 2302 and 2302-PJ are single channel 
battery simulators, functions related to the second channel (i.e., the charger channel) 
are not available for the Model 2302 and 2302-PJ. Therefore:

• battery and charger channel features contained in this manual apply for the 

Models 2306, 2306-VS and 2306-PJ

• only battery channel features contained in this manual apply for the Model 2302 

and 2302-PJ

Refer to Appendix F for specific Model 2302 and 2302-PJ information.

Information contained in this section applies to all power supply channels (unless 
otherwise noted). In this manual, channel 1 refers to the battery channel while chan-
nel 2 refers to the charger channel (2306, 2306-VS and 2306-PJ feature only).

4

Long Integration Measurements

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 

TestEquipmentDepot.com 

Содержание 2302





























































































































































































































































































































































Отзывы:

Нет отзывов