manualshive.com logo in svg

Keithley 2302, Инструкция по эксплуатации, Страница: 23 / 348

Поделиться
Скачать
Keithley 2302 Скачать руководство пользователя страница 23

•

General information

 — Provides general information including warranty information, 

contact information, safety symbols and terms, inspection and available options and

 

accessories.

•

Power supply overview

 — Summarizes the capabilities of the power supply.

•

Remote display option

 — Explains how to use the optional Model 2306-DISP Display 

Module.

•

Power-up

 — Covers line power connection, the power up sequence, and fuse 

replacement.

•

Display modes

 — Explains the four display modes of the power supply.

•

Default settings

 — Lists the factory default settings, and explains how to save and recall 

settings.

•

Menu

 — Provides a table that summarizes the menu items and includes rules to navigate 

the menu structure.

•

SCPI programming

 — Explains how SCPI commands are presented in this manual.

NOTES

This manual covers Keithley Models 2302, 2302-PJ, 2306, 2306-PJ, and 2306-VS 
simulators (power supplies). Since the Model 2302 and 2302-PJ are single channel 
battery simulators, functions related to the second channel (i.e., the charger channel) 
are not available for the Model 2302 and 2302-PJ. Therefore:

• battery and charger channel features contained in this manual apply for the 

Models 2306, 2306-PJ, and 2306-VS.

• only battery channel features contained in this manual apply for the Model 2302 

and 2302-PJ

Refer to Appendix F for specific Model 2302 and 2302-PJ information.

Information contained in this section applies to all power supply channels (unless 
otherwise noted). In this manual, channel 1 refers to the battery channel while 
channel 2 refers to the charger channel (2306, 2306-PJ, and 2306-VS feature only).

1

Getting Started

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 

TestEquipmentDepot.com 

Содержание 2302





























































































































































































































































































































































Отзывы:

Нет отзывов