Comprehensive calibration
The comprehensive calibration procedure calibrates the DCV, DCI, ACV, ACI, and ohms
functions You can also choose to calibrate only DCV/DCI and resistance, or the ACV/ACI func-
tions.
These procedures are usually the only ones required in the field. Manufacturing calibration is
done at the factory and should be done if the unit has been repaired in the field. See the Manu-
facturing calibration paragraph at the end of this section for more information.
Calibration cycle
Perform comprehensive calibration at least once a year, or every 90 days to ensure the unit
meets the corresponding specifications.
Recommended equipment
Table 2-1 lists the recommended equipment you need for comprehensive, DC only, and AC
only calibration procedures. You can use alternate equipment, such as a DC transfer standard
and characterized resistors, as long that equipment has specifications at least as good as those
listed in the table.
Canceling calibration
You can cancel the calibration process at any time by pressing EXIT.
Table 2-1
Recommended equipment for comprehensive, DC only, or AC only calibration
Fluke 5700A Calibrator
DC voltage
AC voltage
(1kHz, 50kHz)*
DC current
AC current
(1kHz)
Resistance
10V: ±5ppm
100V: ±7ppm
10mV: ±710ppm
100mV: ±200ppm
1.0V: ±82ppm
10V: ±82ppm
100V: ±90ppm
700V: ±85ppm
10mA: ±60ppm
100mA: ±70ppm
1A: ±110ppm
100mA: ±190ppm
1A: ±690ppm
2A: ±670ppm
1k
Ω
: ±12ppm
10k
Ω
: ±11ppm
100k
Ω
: ±13ppm
1M
Ω
: ±18ppm
Keithley 8610 Low-thermal shorting plug
*1kHz specifications. 10mV and 700V points require 1kHz only.
All calibration specifications are 90-day, 23° ±5°C specifications.
2-6
Calibration
Содержание 2000
