P a g e
5 | 13
Import into Keil IDE
1.
Open the Keil IDE and choose the
Project
menu item in the menu bar.
2.
Select
Open Project.
A Dialog box opens similar to the one below:
3.
Navigate to the location where you saved the Avnet_ATT_Cellular_IOT project.
4.
Select the Avnet_ATT_Cellular_IOT.uvprojx. You have now imported the project from the mbed.org IDE.
Connecting and Configuring Debug Adapter
The ULINK
pro
supports all SWV features and has ETM Trace support. It also provides Flash programming
capabilities.
NOTE:
When you use the flash programming capabilities, the FRDM-K64F Flash is erased and the OpenSDA boot
loader that was previously in the Flash is gone. If you want to return to using OpenSDA, you must reprogram the
OpenSDA bootloader.
Because you want to use Serial Wire Viewer, it is necessary to install the 20 to 10 pin CoreSight cable to the JTAG
unit. This new cable is provided with the ULINK
pro
unit.
This cable is replaced