Benchy Sparkling - Instruction Manual
Page
6
of
16
Last Updated 3/06/2022 6:03 PM
Benchy Sparkling
–
Bench Top Setup
The Benchy Sparkling can be tucked away cleanly under a counter or it can be displayed and used on
the bench top as a benchtop sparkling and still water dispenser.
To use the Benchy Sparkling as a benchtop dispenser it requires the SPARKLING OUT and CHILLED
OUT lines to be redirected to shanks and taps inserted into the front of the Benchy Sparkling.
The following items (sold separately) are suggested to install the Benchy Sparkling as a bench top
dispenser:
2 x NukaTap Flow Control (
) + 2 x NukaTap FC Auto Close Springs (
2 x 100mm Duotight Long Shank S.S
2 x Tap Handles of your choice.
1 x 7 in faucet tap wrench/spanner tool (
A sharp Stanley knife or a 2 in 1 tube cutter (
) will also be required to shorten the length of
the sparkling water OUT and cold still water OUT tubing.
