KegMaster
™
XL User Manual
Page 12 of 18
Keg King is a registered business name of MCH Australia Pty Ltd
Setting Up Beer and Gas Lines
Using Stepless Clamps
The stainless stepless clamps that come included with the kegerator are the best clamp to
use on the beer line. The stepless clamps grasp the beer line in a perfect circle meaning
to do not pinch the line like worm style clamps. The stepless clamps come in different
sizes so it is important you have the correct style of clamp for the beer line and barb
fitting that you are using. These clamps are a single use item.
To use the clamps the best tool for the job is clamp tool (shown below in photo to left). These tools can
be purchased separately (Part number 6530). If you do not have one of these tools the wire cutters
(shown below to the right) will do an adequate job.
As shown above, all that is required is a quick single clamp with the tool and the job is done.
Using Push-In Fittings
Push-In fittings are a great convenient alternative to using clamps
on your lines.
Using an MFL disconnect and a premium FFL to 8mm push-in
fitting, just screw the threaded end of the push-in fitting firmly onto
the MFL thread of the disconnect. Then push your 8mm line firmly
into the other end of the push-in fitting.
WARNING
To avoid leaks, ensure your beer and gas lines are cut cleanly and square.
