Keenon Robotics W3, Руководство пользователя, Страница: 15 / 96

15
Powering On
1. Power Switch
The power switch is located between the robot chassis and the main body. It
is on the left side when you are facing the robot. Find the power switch as
shown in Figure 3 and press it to power on the robot. The blue light strip in
the gap of the laser layer will be lit up. Wait for about 40 seconds for the
system to get started and be ready to work.
1. Power off the robot in the same way. The robot will be disconnected from
the power supply immediately when the power switch is turned off.
2. When the user needs to move the robot, please turn off the power first.
Figure 3. Position of the Power Switch
Power switch