Quick Start Guide
Installing Your
Keenetic Carrier DSL
For technical support or other information, please visit
help.keenetic.com
AC1200 Dual Band Mesh Wi-Fi VDSL2/ADSL2+ Modem Router
with a 4-Port Smart Switch and USB Port
Model: KN-2111
10:00
Welcome to
Your Keenetic
Next
3
Сonnect a mobile device to your Keenetic device via Wi-Fi.
The default Wi-Fi name (SSID) and Wi-Fi password are
printed on your Keenetic device’s back label along with a QR
code that will automatically connect your mobile device
to the Keenetic device’s Wi-Fi when scanned. Alternatively,
сonnect a computer to any gray Ethernet port on your
Keenetic device using the included Ethernet cable.
4
Once connected, an Initial Setup Wizard window will appear
on your mobile device / computer. If the Wizard does not
appear, using a browser go to
my.keenetic.net
.
Note:
If the Initial Setup Wizard doesn’t appear, please refer
to the Frequently Asked Questions section below.
5
In the Initial Setup Wizard window select the
configuration option and follow the setup
instructions.
2
Connect your Keenetic device to a power source.
Check that both the Status LED
C
and Wi-Fi LED
D
are illuminated and not blinking.
1
Position your Keenetic Carrier DSL (hereinafter ‘Keenetic
device’) within cable lengths of phone and power outlets.
Place your Keenetic device in an open area for better
wireless coverage.
1
4
3
2
0
DSL
