VideoGhost
Copyright © www.keelog.com
7
Recording screenshots
Recording mode is the default mode of operation for the
VideoGhost
. In record mode, the
device will silently monitor the DVI, HDMI, or VGA video signal and record a screenshot every
few seconds. The screenshots will be stored as JPEG files on the internal flash drive.
Installation of the video-logger in record mode is quick and easy, no software or drivers are
required. Connect the
VideoGhost
to the source of the video signal, such as the output of the
graphics card, or the TV output.
DVI version
HDMI version
VGA version
Then, connect the output device (TV or monitor) to the other end of the
VideoGhost
.
DVI version
HDMI version
VGA version
