Vehicle PTZ Camera
User Manual
40
40
Picture 5-5 Dial-Up
Note:
1) Currently, it supports such network types: 3G, 4G, TDDLTE and FDDLTE.
2) After 4G dial-up is successful, you cannot view images through WiFi STA mode.
3) After 4G dial-up is successful, the hotspot function under AP mode will be enabled at the same time.
4)
When 4G signal strength is medium or weak, it will affect image transmission; when the network isn’t
4G type, image transmission is unavailable.
5.1.4 Positioning
Go to
Settings > Network > IP and Port > Positioning
to configure positioning function. Check
“
Enable
”.
Mode
: Mixed mode of BDS/ GPS
Report-to-center Interval
: Interval of sending data to the platform
Speed unit
: Configure vehicle speed unit, options including km/ h and mile/ h
Current speed
: Speed of current vehicle
Picture 5-6 Positioning
