Vehicle PTZ Camera
User Manual
36
36
5. Settings
Some models may not support some of the functions stated below. User operation is subject to the actual models
and clients.
5.1 Network Access
Camera supports multiple methods (via Ethernet, PPPoE and mobile network) to access to network. The
following will introduce how to configure network parameters through the web client.
5.1.1 Ethernet
Go to
Settings > Network > IP and Port > LAN,
as shown in the picture to configure IP Address, Subnet
Mask and Default Gateway.
Picture 5-1 LAN
5.1.2 Wireless
Go to
Settings > Network > IP and Port > Wireless
. There are 2 working modes of the camera: AP Mode
and STA Mode.
AP Mode
After electrifying the camera, the default is AP mode and the wireless terminal can connect to the
wireless signal sending out from the camera. After connecting successfully, user can login to the
camera through its IP address.
