HD Intelligent Speed Dome Camera
User Manual
50
VSIP protocol only supports registering to back-end platform of this company or
other SDK-integrated back-end platforms.
5.2.2
ONVIF
The client supports adding device to the back-end platform through ONVIF protocol,
which enables different network video products such as cameras and recorders from
different manufacturers to communicate with each other.
Configuration steps are as follows:
1) Go to
Settings > Network > Access Protocol > ONVIF
;
Picture 5-6 ONVIF
2)
Select “
Enable
”. Afterwards, the device will generate a server address (URL)
automatically, default port number being 80;
3) Set authentication method for ONVIF login. When selecting "N/A", user can login
freely; when selecting "WS-Username token", user needs to verify username and
password before login;
4)
Click “Save” to validate settings.
5.2.3
SIP
On SIP interface, add the camera to GB platform according to the requirements of
GB/T28181. Configuration steps are as follows:
1) Go to
Settings > Network > Access Protocol > SIP;
2)
Select the “Registered VMS” (Registered VMS 1 or Registered VMS 2). The camera
supports registered to 2 different VMS;
3)
Select “Enable”;
4) Enter Network Access ID, VMS ID, VMS Port Number, User Name/ Password and
Video Encoding Channel ID, which are all provided by VMS;
5)
Click “
Save
” to validate settings.
