HD Intelligent Speed Dome Camera
User Manual
41
2) Select a preset from the dropdown list.
3) Configure the start time and end time.
4)
Click “Add” to add a patrol preset and click “Delete” to delete the selected patrol
preset.
5)
Click “Save” to validate settings and click “Load” to load patrol.
4.2.9
Vehicle OSD
When the camera detects moving vehicles in the guard areas, it will display vehicle
information according to the configured OSD. Configuration steps are as follows:
Note:
Human recognition cameras do not support OSD configuration.
Select “Enable”, and when the panoramic image on the dome camera interface
is enabled, the OSD text will be overlaid on the panoramic image.
1) Go to
Intelligent > Settings > OSD
.
Picture 4-13 OSD setting
2)
Select “Enable” to enable OSD on vehicle panoramic image.
3) Select a position where the OSD will display.
4)
Select a time format from the dropdown list of “Time Format”.
5) Select a color from the dropdown list as the background color.
6) Select font size and font color from the dropdown lists.
7) Select the information to display and it will show in the text box. Adjust the OSD
content sequence by the selection sequence. You can edit the text box according to
the example below, such as address and lane direction.
