manualshive.com logo in svg

Keba ServoOne CM Series, Руководство по эксплуатации

Поделиться
Скачать
Keba ServoOne CM Series Скачать руководство пользователя страница 55

55

Diagnostics 

Operation Manual ServoOne CM-L and ServoOne CM-A 

ID no.: 1800.208B.1-00     Date: 03/2020

Diagnostics 

5 

Diagnostics 

5.1  Status indication LED 

5.1.1 

ServoOne CM-L charging module 

ERR

Voltage

ERR LED 

Red

Error status, charging module (flashing code)

Voltage LED 

Green

Status mains supply available

Figure 5.1 

Status LEDs, ServoOne CM-L charging module

Behaviour

LED

Operating indication: 

Voltage  (Green)

Error indication: 

ERR (red)

Off

-

No error and no warning

Flashing slowly

Ready, the DC link is not connected to the 

system.

There is a warning, however the charging 

module is ready. 

Table 5.1 

Significance of the status LEDs, ServoOne CM-L charging module 

Behaviour

LED

Operating indication: 

Voltage  (Green)

Error indication: 

ERR (red)

Flashing quickly

The DC link is in the pre-charging phase, 

can take a few seconds. 

-

On

The DC link is pre-charged and the active 

supply unit in operation. 

There is an error, the DC link is discon-

nected from the system. Error message 

appears in the active supply unit and the 

axis modules.

Table 5.1 

Significance of the status LEDs, ServoOne CM-L charging module 

Содержание ServoOne CM Series







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды