Keba OP 460-LD/A, Руководство по проектированию устройства, Страница: 9 / 54

1 Introduction
1.1 Purpose of the document
This document describes the structure, installation and connection of the op-
erating panel OP 460-LD/A.
Information
This manual is not adressed to end costumers! Necessary safety notes for
the end costumer have to be taken into the costumer manual in the respective
national language by the machine builders and system providers.
1.2 Preconditions
This document contains information for following persons with corresponding
preconditions:
Target group Prerequisite knowledge and ability
Project engineer
Technical basic education (advanced technical education, engineering
degree or corresponding professional experience),
Knowledge about:
●
the method of operation of a PLC,
●
safety regulations,
●
the application.
Start-up technician
Technical basic education (advanced technical education, engineering
degree or corresponding professional experience),
Knowledge about:
●
safety regulations,
●
the method of operation of the machine or system,
●
fundamental functions of the application,
●
system analysis and troubleshooting,
●
the setting options at the operating devices.
Service technician
Technical basic education (advanced technical education, engineering
degree or corresponding professional experience),
Knowledge about:
●
the method of operation of a PLC,
●
safety regulations,
●
the method of operation of the machine or system,
●
diagnosis possibilities,
●
systematic error analysis and troubleshooting
OP 460-LD/A Introduction
© KEBA 2012
Project engineering manual V1.05 9