Information
In this case, the Ethernet connection must have been established, the
BOOTP Server must be correctly configured and an OS image file must be
available on the server.
●
Disable internal network controller
:
If you select this item, the internal Ethernanet interface "CELAN1: Onboard
Ethernet" (see
Start
▶
Settings
▶
Control Panel
▶
Network
▶
Network
Configuration
) will be turned off at next startup.
Information
This function is necessary if - for example - an Ethernet interface has to be
installed at the PCMCIA slot (only for KeTop T100).
The Ethernet controller has to be configured within the Control panel.
●
Show Inputpanel on Startup
:
If you select this item, the softkeyboard will be launched at every startup.
8.2.6
Control of Buttons (Pushbuttons)
1
... Symbols for the LEDs of the membrane
keypad (if available) (1 to 4: left keypad,
9 to 12: right keypad,
13 to 16: keypad below)
2
... Symbols for operating elements
a
... The black ring signalizes the actuation of
an operating element
This toolbox enables a simple functional control of the buttons of the KeTop.
By clicking on one of the three symbols for operating elements (2), the corre-
sponding LEDs of the operating elements can be switched on, off or to flashing.
The first click switches the LED to flashing, the second click switches the LED
on, and the third click switches the LED off again.
The same applies to the LEDs of the membrane keypad (1).
KeTop - Specific Operating Instructions
KeTop T50VGA
© KEBA 2009
User's Manual V1.50
92