Keba Kemro KeTop T10, Руководство по проектированию устройства

Страница: 85 / 91

20 Appendix: Status and error codes
In this appendix the status and error codes of the KeTop T10 and their mean-
ings are explained.
20.1 Status codes
The status code consists of five digits. Each digit delivers information about a
certain part of the device:
0 0 0 0 0
Sensors KVC Application Display EEPROM
In the following tables the meanings of the digits are explained:
Sensors
Code Diagnosis code Description
0 INU_OK No error
1 INU_SENSOR_READ Measuring value cannot be read
2 INU_SENSOR_RATE Unexpectedly large number of measuring values
3 INU_SENSOR_VALUE Implausible measuring value
KVC
Code Diagnosis code Description
0 KVC_OK No error
1 KVC_NOT_INIT KVC cannot be initialized
2 KVC_PROTOCOL_ERR Protocoll error
3
KVC_CONN_UNSTABLE
Connection unstable (Warning)
Application
Code Diagnosis code Description
0 APPL_OK No error
1
APPL_NOT_INIT
Application cannot be initialized
2 APPL_EEPROM Application cannot read or write to EEPROM
3
APPL_DISPMAN
Display manager cannot write (e. g. icon size mismatch,
invalid icon number, etc.)
4 APPL_DEVMON Error monitoring the devices
5 APPL_DEACTIVATED
Device deactivated (e.g. joystick not available, no key-
board available, etc.)
Display
This error code is binary coded and shows incorrect iconsets.
KeTop T10 Appendix: Status and error codes
© KEBA 2014
Project engineering manual V1.02 85