Keba Kemro KeTop T10, Руководство по проектированию устройства

Страница: 63 / 91

●
The avoidance of human errors by means of the ergonomic and logical
design of operating devices
●
The avoidance of hazardous materials and commodities
Taking protective measures against hazards that cannot be eliminated
These measures include, for example:
●
Guards, railings, housings
●
Protective devices (light barrier for hazard elimination)
●
Protective control equipment (enabling control devices, two-hand controls,
speed monitoring etc.)
User information about residual hazards
This last of the three options is used if residual hazards remain after the first
two options have been applied. These measures include, for example:
●
Warning notices
●
Training and organisational measures
●
The use of personal protective equipment
17.3 "Technical Construction File"
The technical construction file contains all the documents that are required to
prove the safety of the machinery / safety component. These are, for example:
●
A complete drawing of the machinery or safety component including con-
trol circuit diagrams
●
Hazard and risk analysis
●
Calculations
●
Research and test results
●
A list of the basic safety requirements of the Machinery Directive applicable
to the machine and a description of the solutions
●
Applied Standards
●
Operating instructions
●
A list of the quality assurance measures in the procedure
The technical construction file must be retained for a minimum of 10 years after
the supply of the last product, and must be presented within a period of a few
days in the event of a claim for damages.
17.4 "State of the Art"
This means technical possibilities at a certain point of time that are based on
certain scientific and technical knowledge. The state of the art also means
something that is commercially viable, that is it can be realised by the majority
in the industrial sector concerned.
KeTop T10 Appendix: Machinery Safety
© KEBA 2014
Project engineering manual V1.02 63