14.3.2
Interior view
Fig.14-9:
Interior view of connection box
K1
... 17-pin female connector (Coninvers)
for KeTop connection cable
X1
... Terminal block for power and
control lines (enabling control
device and emergency stop)
X3
... Terminal block for data lines
SHIELD
... Cable shield clamp with con-
nection surface for cable
shield of data lines (not used
for strain-relief of the cable!)
Details about connecting the connection box KeTop CB 211 to the KeTop see
chapter "Connection and wiring".
14.3.3
Technical data of the connection terminals
The following technical data apply to the X1 and X3 connector terminal blocks
already available in the connection box:
Connection capacity:
●
rigid / flexible / wire gages:
0,14-1,5 mm
2
/ 0,14-1,5 mm
2
/ 28-16 AWG
●
flexible with wire end ferrules without / with
plastic sleeve:
0,25-1,5 mm
2
/ 0,25-0,5 mm
2
Grid dimension:
3,81
Insulation length:
7 mm
2
Tightening torque:
0,22-0,25 Nm
Order data of Co PHOENIX:
Gateway-terminal block
PHOENIX
Type
Part no.
X1
MCVR 1.5/6-ST-3.81
1827169
X3
MCVR 1.5/7-ST-3.81
1827172
X4, X4B
MCVR 1.5/10-ST-3.81
1827208
KeTop T10
Accessories
© KEBA 2014
Project engineering manual V1.02
53
Содержание Kemro KeTop T10
Страница 1: ...Kemro KeTop T10 Project engineering manual V1 02 Translation of the original manual ...
Страница 4: ......
Страница 8: ......
