Keba Kemro KeTop T10, Руководство по проектированию устройства

Страница: 10 / 91

Target group Prerequisite knowledge and ability
Start-up technician
Technical basic education (advanced technical education, engineering
degree or corresponding professional experience),
Knowledge about:
●
safety regulations,
●
the method of operation of the machine or system,
●
fundamental functions of the application,
●
system analysis and troubleshooting,
●
the setting options at the operating devices.
Service technician
Technical basic education (advanced technical education, engineering
degree or corresponding professional experience),
Knowledge about:
●
the method of operation of a PLC,
●
safety regulations,
●
the method of operation of the machine or system,
●
diagnosis possibilities,
●
systematic error analysis and troubleshooting
1.3 Intended Use of the Handheld Terminal
The intended use of the KeTop T10 covers tasks from watching and parame-
trizing up to operating of machines e.g.:
●
Injection moulding machine
●
Robots
●
Machine tools
●
Textile machines
●
Printing machines
●
Theater backdrops
●
and similar
in normal operating modes
●
Automatic
as well as
●
Setting
●
Teaching
●
Testing
●
and similar
in half automatic or manual mode.
Enabling control devices and an optional emergency stop button or halt-button
are available as savety features.
Introduction KeTop T10
© KEBA 2014
Project engineering manual V1.02 10