CP 503/A, CP 505/A,D,K, CP 507/
A,C
Operating behavior
Project engineering manual V1.06
57
© KEBA 2021
State
Display
Description
OsReady
This state is only switched through during startup. No
runtime system is loaded yet.
In case of service (e.g. after a serious system error)
the startup can be stopped in this state. In this service
mode it is possible to execute certain actions (e.g.
"clear-retain").
STOP
In this state, the IEC application program is loaded,
but there is no cyclic processing of the application. In
this state, no outputs can be set by the application.
RUN
In this state, application programs are processed. The
process data exchange takes place according to the
configuration.
EXCEPTION
The controller is in error state (Exception).
Pressing the CTRL key toggles between the operating states.
8.3
7-segment display
The CP 50x/x has a 7-segment display. During operation, the current status
is shown on the display.
Pushbutton operation during operation
Short key press
Go to next action (next displayed state)
Long key press
Start an action
The following tables describe the menu structure in more detail.
Information
The displayed menu structure shows the full expansion of the menu. The
display of the menu may differ depending on the product variant.
OsReady
Displayed state
(continue with short key press)
Action
(execute with long key press)
The controller is in the OsReady
state.
Go to action: start controller
Start controller
The controller is started.
Clear retina data and reinitialize
The retaining data is deleted and
then reinitialized.
Delete application
The application is deleted.
