Keba KeContact P30 x series, Руководство по настройке, Страница: 37 / 68

Overview
37/68
1 Overview
This manual is an expansion of the " Installation manual ". You must comply with all instructions
and safety information in the installation manual!
Install the charging station according to the " installation manual ".
General
Your KeContact P30 charging station has an integrated
communication module for the connection of the charg-
ing station per OCPP to a backend. The connection
can be made via LAN or GSM (optional).
Multiple charging stations can be interlinked in the form
of a load management group (master / slave) (for de-
tails, see Chapter "
4 Local load management [44] ").
Display
The dot matrix display (1) can display various informa-
tion depending on the operating state (e.g. software
version, energy meter status).
During periods of inactivity, the display brightness is
dimmed/switched off after a few minutes.
The dot matrix display shines through the housing and
is not visible when the display is deactivated!
en