KEB COMBIVERT P6, Инструкция по эксплуатации

Страница: 15 / 78

15
bASIC SAfETy INSTRUCTIONS
1.1 Target group
These instructions for use are intended exclusively for qualified electricians.Electrical
personnel for the purpose of this instruction manual must have the following qualifica -
tions:
• Knowledge and understanding of the safety instructions.
• Skills for installation and assembly.
• Knowledge of the start-up and operation of the product.
• Understanding of the function in the used machine.
• Detection of hazards and risks of the electrical drive technology.
• Knowledge of
DIN IEC 60364-5-54
.
• Knowledge of the national safety regulations (e.g.
DGUV regulation 3
).
1.2 Transport, storage and proper use
The transport is carried out by qualified persons in accordance with the environmental
conditions specified in this manual. Drive controller shall be protected against excessive
strains.
Do not store the product
• in the environment of aggressive and/or conductive liquids or gases.
• in areas with direct sunlight.
•
outside the specified environmental conditions.
1 basic Safety Instructions
The COMBIVERT is designed and constructed in accordance with state-of-the-art tech-
nology and the recognized safety rules and regulations However, the use of such de-
vices may cause functional hazards for life and limb of the user or third parties, or dama-
ges to the system and other material property.
The following safety instructions have been created by the manufacturer for the area of
electric drive technology. They can be supplemented by local, country- or application-
specific safety instructions. This list is not exhaustive. Violation of the safety instructions
by the customer, user or other third party leads to the loss of all resulting claims against
the manufacturer.
NOTICE
Hazards and risks through ignorance.
► Read the instructions for use !
► Observe the safety and warning instructions !
► If anything is unclear, please contact KEB Automation KG !