KEB COMBIVERT F5, Руководство по установке

Страница: 16 / 28

GB - 16
Control
2.5.1 Inputs
2.5.1.1 Specification of the STO inputs
STO
inputs
Status 0 Status 1
UL [V] IL [mA] UH [V] IH [mA]
max. 5 25 30 25
min. -3 not defined 15 5
The maximum short-term starting current of the input is limited to 300 mA.
2.5.1.2 STO with OSSD signals
The filter time depends on the minimum input voltage and can be specified as follows:
Input voltage [V] OSSD pulse width [ms]
15 0.1
18 0.8
20 1.1
24 1.5
30 1.8
2.5.2 Output STO
The short-circuit proof, digital output is specified in accordance with IEC61131-2. The output
rated current is 100 mA at 24 Vdc.
The output is 24 Vdc if modulation is possible. Inputs STO1, STO2 and ST must be set for it.