KEB COMBIVERT F4-C, Руководство по применению

Страница: 192 / 283

3
ANTRIEBSTECHNIK
6 10 3
KEB COMBIVERT F4-C
Name: Basis
19.11.98
6
Section Page Date
© KEB Antriebstechnik, 1997
All Rights reserved
Chapter
Functional Description Encoder Interface
STAR
T
STO
P
ENT
ER
F/R
FUN
C. SPE
ED
STAR
T
STO
P
ENT
ER
F/R
FUN
C.
SPE
ED
è
è
6.10 Encoder Interface
6.10.1 Encoder Summary
Two independent channels for the speed measurement are supported, which can be
used both as actual speed detection for speed control and as setpoint value source.
Thus allowing the realization of speed synchronous drives. Position detection,
positioning and angular synchronous operation are not supported.
Channel 1 supports a standard incremental encoder interface. Channel 2 can process
in different versions incremental encoders, tacho generators, initiators or +/-10 V
signals.
Units with integrated encoder interface are registered according to the following code:
XX.F4.CXX-XLXX
Version number ( starts with 0 )
Interface type ( see table Interface Types )
L ( code letter for integrated encoder interface )
4 ( Special unit 400V )
5 ( Special unit 230V )
Interface Type Channel 1 Channel 2 Separate Supply *)
0 encoder interface Tacho input yes
1 encoder interface encoder interface yes
2 encoder interface +/- 10V input yes
3 encoder interface Initiator yes
*) Separate supply means, that control inclusive encoder interface are supplied with
energy from an external voltage source. Thus status and error messages are stored
even when disconnecting the power circuit.
Customer-specific units may
deviate from this code!
Fig. 6.10.1 Encoder summary
Housing size D and E
From housing size G upwards
Encoder interface with tacho input
Encoder interface with tacho input
Encoder interface with 2nd encoder
Encoder interface with 2nd encoder
Encoder interface with ±10V input
Encoder interface with ±10V input
Encoder interface initiator
Encoder interface mit initiator