KEB COMBIVERT 10F6 Series, Инструкция по эксплуатации

Страница: 59 / 84

59
OVerVIeW OF THe cOMbIVerT F6
4 Installation and connection
4.1 Overview of the cOMbIVerT F6
Housing 2 No. Name Description
1
2a
2
3
4
5
5a
1 /
5a
---
Fixing points for the optional shielding
plates. The shielding e.g. from the
motor cable is laid on the mounting
plate in the control cabinet or on the
shielding plates (optionally available).
Control unit:
• 00F6V80-2000
Power unit:
• Built-in version
00F6V80-2001
• Push-through version
00F6V80-2002)
2 ---
LEDs (see the manual for control unit
chapter „Overview“)
2a ---
For control card COMPACT:
FS without function.
• For control card COMPACT
FS without function
• For control card APPLICATION
and PRO:
Status indication of the safety
module
3 X4A
Diagnostic interface with RS232/485
interface according to DIN 66019II
protocol /
operator slot
4 X1A
Power circuit terminals for:
• Mains input
• Braking resistor
• DC supply
• Motor connection
5 PE
Protective earth;
at connection to protective earth
each terminal may be assigned only
once.
Figure 14: F6 housing 2 top view