KEB COMBISTOP, Инструкция по эксплуатации

Страница: 9 / 53

Preface
©
2021 KEB America, Inc. 9
Glossary
AC Alternating current.
Aggressive Fumes/Liquids Gasses or liquids that are chemically reactive and may cause
corrosion in exposed machine parts.
Air Gap The gap between the armature and the magnet. This air gap must
be precisely calibrated to a specific width, denoted as X. If the air
gap is too wide, the braking torque is reduced. If the air gap is too
narrow, the brake may not release correctly.
Application The machine/system in which the KEB device is to be used. For
brakes the application is typically the motor to which the brake is
attached.
Armature The component of the brake which rotates with the driven
shaft/surface and presses against the magnet to engage the
brake.
AWG / Wire Gauge American Wire Gauge. A measure of the thickness of a wire using
standardized sizes.
Branch Circuit Protection Circuit protection for the portion of the electrical distribution
system that extends beyond the final branch circuit protection
device. A branch circuit is used to run motors or other appliances,
and is what is commonly found inside a building.
CE European safety standards for products in the European
Economic Area. Manufacturers self-test products against these
standards to maintain CE certification. The CE mark indicates a
product meets EEA safety standards.
CEC Canadian Electric Code. Safety standard for electrical installations
used in Canada.
Control Device/Interface The COMBISTOP brake is controlled electronically by a control
device. This can be as simple as a switch, or as complex as a full
suite of control software.
CSA Canadian Standards Authority, also known as CSA Group.
Organization that tests and certifies products according to
Canadian safety standards. The CSA mark indicates a product
meets Canadian safety standards.
Customer The corporation or individual who purchased the COMBISTOP
brake.
DC Direct current.
Device / KEB Device The COMBISTOP brake described in this manual.
Drive Shaft A mechanical component for transmitting torque and rotation from
a motor to other parts of a mechanical system.