![KEB COMBISTOP 38 Скачать руководство пользователя страница 27](http://html2.mh-extra.com/html/keb/combistop-38/combistop-38_instructions-for-use-manual_3840995027.webp)
27
MOUNT brAKE
4.1.2 Observe during mounting
During mounting, please observe the following notes/instructions:
►
The friction surfaces of the brake must not come into contact with oil, grease, water
or other fluids. Any contamination will result in loss of torque.
► Never use aggressive fluids (for example, cleaning agents) or the like to clean the
brake.
►
When mounting the hub and the magnetic system, the teeth of the hub and the
lining must not be damaged.
►
The lining must be easily movable on the hub.
►
The movement of the armature must not be impeded by the ingress of foreign parti-
cles into the air gap. Take appropriate safety measures as required.
►
The eccentricity of the mounting hole circle relative to the shaft end must not ex-
ceed the following values:
cOMbISTOP 38
02
03…06
07…10
11
Eccentricity / mm
0.2
0.4
0.5
0.6
►
The angular deviation of the mounting surface relative to the shaft must not exceed
the following values (in relation to the mounting hole diameter):
cOMbISTOP 38
02…03
04…05
06…07
08…10
11
Angular deviation / mm
0.04
0.05
0.06
0.08
0.1
4.2 Mount brake
NOTICE
No suitable friction surface available!
► Optionally mount flange or friction disc on motor bearing shield.
Содержание COMBISTOP 38
Страница 2: ......