KEB COMBILINE 0SZ1I05-1001, Инструкция по эксплуатации, Страница: 12 / 44

12
bASIC SAFETy INSTRUCTIONS
1.4 Electrical connection
DANGER
Voltage at the terminals and in the device!
Danger to life due to electric shock!
► For any work on the unit switch off the supply voltage and secure it
against switching on.
► The supplied drive converters and filters form a technical unit and
must therefore not be disconnected from the mains independently of
one another.
► Wait until the drive has stopped in order that no regenerative energy
can be generated.
► Observe capacitor discharge time, if necessary measure DC voltage
at the terminals.
► Never bridge upstream protective devices (also not for test purpos-
es).
For a trouble-free and safe operation, please pay attention to the following instructions:
• The electrical installation shall be carried out in accordance with the relevant re-
quirements.
• Cable cross-sections and fuses must be dimensioned according to the design of
the machine manufacturer. Specified minimum / maximum values may not be fallen
below /exceeded.
• With existing or newly wired circuits the person installing the units or machines must
ensure the EN requirements are met.
1.5 Start-up and operation
CAUTION
High temperatures at the components!
burning of the skin!
► Cover hot surfaces safe-to-touch.
► Before working let the unit cool down.
► If necessary, attach warning signs on the system.
• During operation, all covers and cabinet doors shall be kept closed.
• Use only approved accessories.
• Never touch terminals, busbars or cable ends.