KEB C6 P34 BOX Series, Инструкция по эксплуатации

Страница: 56 / 78

56
OPEraTING SySTEMS
The C6 E22 / C6 P3x Linux is configured to use the IP address 192.168.0.100. This
also makes it possible to set up a remote connection to the device with a development
PC, e.g. if no display unit is available. To do this, configure the Ethernet adapter of the
development PC with another address 192.168.0.xxx and connect to the device with
Putty as service user:
4.6.3 Change password for service user
To change the password, proceed as follows:
• Login as user “service”
• Select menu “8) Change password”
• Follow the instructions:
- Enter old password
-
Enter new password twice. It must fulfill conditions regarding length and com -
plexity
• Reboot the device