manualshive.com logo in svg

KE LOGEM 928, Руководство по эксплуатации

Поделиться
Скачать
KE LOGEM 928 Скачать руководство пользователя страница 130

130

  Operation Manual V.34 - Modems, Version 07/97

V.25

bis

Chapter 5

CRN xxx

Dial a Phone Number

The subscriber telephone number is dialed automatically by the modem:

e.g. CRN 1234567890 (LF)

The parameters for the CRI command are valid for this dial character
string. The L may be typed to dial the last telephone number.

CRS (n)

Dial Up with Short Dial Register

The modem dials the dial character string xxx from the short dial register
(n). Max. 20 short dial registers are available.

e.g. CRS 1 (LF)

PRN (n);xxx Set Short Dial Register

The command allows to store max. 20 dial character strings xxx (with 40
characters each) permanently. The information remains stored even after
deactivation of the modem.
The parameters necessary for dialing (e.g. P, =, >,&etc.) are stored by the
modem with the phone number:

e.g. PRN 1;=P1234567890 (LF)

The phone number 1234567890 is stored in the short dial register 1. The
modem dials using pulse dialing procedures (P) and performs a dial pau-
se (=) before dialing.

RLN

List of Phone Numbers

This command displays the list of stored telephone numbers.

V.25bis Commands

Содержание LOGEM 928









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды