KE LOGEM 928, Руководство по эксплуатации

Страница: 119 / 200

119
Operation Manual V.34 - Modems, Version 07/97
REG
Chapter 4
S80 Command Interpreter
register values / default description
S80 0...3 / 0 command interpreter
0 AT commands
1 AT/V.25bis commands
(no autobaud!)
2 AT/V.25bis commands and interface
lines acc. to V.25bis (no autobaud,
ref. to register S51)
3 V.25bis/AT commands and interface
lines acc. to V.25bis (no autobaud,
ref. to register S51)
At S80=0 the function of the interface lines is acc.to the command settings
of AT&C(n), AT&D, AT&R and AT&S.
At S80=1 or 2 the modem evaluates incoming commands acc. V.25bis if
the command line does not start with an AT.
At S80=2 the interface signals are initialized automatically acc. V.25bis.
The command interpreter operates generally acc. to V.25bis. The modem
operates Hayes compatible whenever it detects a command line starting
with an AT. In this case the command echo is activated again. If a
command line does not start with an AT the modem operates in V.25bis
mode again. This setting is designed for basic configurations if you employ
e.g. AT commands for configuration (i.e. service PC) and need V.25bis
commands for operations with the terminal equipment. Autobaud has to
be deactivated before register S80 is set to 1, 2 or 3.
At S80=3 the modem issues V.25bis reports after POWER ON. DNL
sequences are supported.
Register Description