70
TV (1Seg)
Initial Setup of TV (1Seg)
To watch TV (1Seg), you need to configure initial settings.
When the standby screen is displayed, press
c
.
➡
Use
a
to select
TV
and then press
c
(Select).
➡
Use
j
to select
TV (1Seg)
and then press
c
(Select).
Disclaimer notes are displayed.
➡
Use
j
to check the disclaimer notes, use
j
to select
OK
, and then press
c
(
選択
[Select]).
The initial setting screen for using TV (1Seg) is
displayed.
• The screen for setting TV (1Seg) channels appears.
➡
Use
j
to select
放送波スキャン
(Broadcast
signal scan) and then press
c
(
選択
[Select]).
Automatic channel scanning begins. When receivable
channels are found, the channel setup is completed.
• Select
マニュアル設定
(Manual) to set the channel
manually.
Watching TV (1Seg)
When the standby screen is displayed,
press
c
.
➡
Use
a
to select
TV
and then press
c
(Select).
➡
Use
j
to select
TV (1Seg)
and then press
c
(Select).
■
To Change Channels
Use
s
to change channels.
• Before using this feature, you must configure TV
(1Seg) initial settings (see the procedure on the left).
1ch
2ch
…
12ch
TV (1Seg)
Change channels one by one.