43
Making and
Ans
w
er
ing C
alls
Adjusting the Incoming Ring
Tone Volume
When the standby screen is displayed, press
c
.
➡
Use
a
to select
Set Functions
and then press
c
(Select).
➡
Use
j
to select
Tone/Vib/Lamp
and then press
c
(Select).
➡
Use
j
to select
Incoming Setup
and then press
c
(Select).
➡
Use
j
to select
Incoming Call
and then press
c
(Select).
➡
Use
j
to select
Volume
and then press
c
(Select).
➡
Use
j
to adjust the volume and then press
c
(OK).
• Each press of
j
changes the volume one step.
STEP UP
The ring tone volume gradually increases.
5 (Deka)
(Loud)
～
1
(soft)
The ring tone sounds at the set volume.
OFF
The ring tone does not sound.
Turning On the Answer Memo
When the standby screen is displayed, hold down
C
for at least one second.
is displayed on the standby screen.
■
Turning Off the Answer Memo
When the standby screen is displayed, hold down
C
for at least one second.
The answer memo is turned off and disappears from the
standby screen.
• The cell phone can record a maximum of ten
messages, each up to 60 seconds long.
• Answer memo is a function that automatically answers
calls and allows callers to record messages. Use the
Answering Service (Voice Mail) when your phone is
turned off or when you are in a location where a signal
cannot be received.
