KBS TP-12/E, Инструкции по установке, эксплуатации и обслуживанию

Страница: 18 / 47

17
GB-Teppanyaki Electric Oriental-Electric-20201023
F
R
M
-P
D
E
-03
-04 (
N
Y
T
/R
&
D
/2
0
2010
23
)
4.3 Safety Devices and Accessories
The appliance is provided with safety devices. The additional devices must be added if necessary to comply
with the relevant legal requirement during the installation. There are food pan and power cable as accessories
for these appliances.
4.4 Position and Fixing
1. Authorized personnel must do the installation.
2. Install the appliance according to National Safety Standard about electric-heated standard.
3. Install the appliance under an extractor fan to remove the cooking fumes.
4. Make sure that any object around or under Teppanyaki Electric does not obstruct air volume required for air
circulation.
5.
Put away any flammable materials near Teppanyaki Electric.
6. When the appliance is freestanding, keep a distance at least 10 cm from side, and rear walls. Especially when
the appliance close to wall and does not protected with fire-resistant materials made.
7.
Install the appliance separately or side by side with other appliance according to recommended range.
8. Put Teppanyaki Electric on solid, flat, and horizontal surface.
9. Adjust the height of the four feet by using brackets.
10. Before turn the appliance ON, remove the protective film. Remove any adhesive with appropriate solvent.
11. Eliminate all packaging material according to national laws.
4.5 Electric Power Connection
1. Before connecting the appliance to the main supply, compare the electrical data in the rating plate (on the
appliance side panel) to the local electric energy supply. Make sure the main voltage correspond to the voltage
indicated on the nameplate of the appliance.
2.
Registered installation companies must do the electric installation concerned with certain local and national
regulations. The companies are responsible for interpret all regulation and perform the installation and safety
instructions. The warning signs and nameplates must strictly conform.
3.
The appliance equipped with a power terminal and connected with power cable and power socket.
4. DO NOT put the power cable near heat sources or water leakage area.
Important!
Make the daily check that the safety devices are properly install and in good working order.
WARNING!
To avoid electric shock, it is necessary to have earth connection. You can find the
earth connection at the terminal boards, identified with symbol to where earth
wire has to connect.