Introduction
Welcome to KBC Networks’ Quick Start Guide for
the ESUL4-FL1, 4 copper port, 1 fiber port
unmanaged switch. This document provides
some quick tips on how to get up and running.
For more detailed information see the Downloads
section below.
Features:
•
Low power
•
Broad, dual redundant power input
•
Full & half duplex operation
•
MDI/MDI-X
•
IP40 casing
Downloads
Installation manual
Other features and functions are described in the
unabridged manual:
http://www.kbcnetworks.com/esul4-fl1-
switch/network-products/esul4-fl1-series-n
Specification sheets:
http://www.kbcnetworks.com/esul4-fl1-
switch/network-products/esul4-fl1-series-n
Release Notes:
http://www.kbcnetworks.com/specification-
downloads/technical-release-notes
System Contents
Qty Description
1
Ethernet switch fitted with DIN rail mount.
1
24Vdc PSU.
1
Wall-mount brackets with screws.
1
Pluggable terminal block.
Equipment Required for Deployment
You will need a 24Vdc power supply; this is
supplied with the switch.
Quick Start Guide
ESUL4-FL1-*2-D*
Industrial Ethernet Switch
QSG-ESUL4-FL1-Rev1208
www.kbcnetworks.com
Copyright © KBC Networks Ltd. 2012
