eCopper™
QSG-EERF16-GN3-R-RX-B_Series-Rev2101
www.kbcnetworks.com
Copyright © KBC Networks 2021
Quick Start Guide
EERF16-GN3-R-RX-B
EoU Receiver 16*UTP Ports and 3*1000M RJ45
Introduction
The KBC EERF16-GN3-R-RX-B series is an Ethernet over UTP (EoU) receiver
with 16 UTP ports supplying Power over Wire (PoW) and 3*10/100/1000M
Ethernet ports. This receiver provides connectivity up to 16 PoW/PoE (EERF1-
LS1-T-MN-B) transmitters. Power is supplied to the transmitter through the
UTP cable. Varying data rates are supported depending on cable distance and
quality. This product also provides PoW management, allowing the operator to
remotely switch power on or off to any of the UTP channels. Plug-and-play
design ensures ease of installation with no electrical adjustment needed. LED
indicators are provided to show the operational status of the unit.
This receiver is available in a 1U rack configuration.
Features
•
16 UTP ports with PoW
•
3 *10/100/1000M Ethernet ports (1 on the front and 2 at the rear)
•
PoW management
•
Full switching capability
•
Connects up to 16 (EERF1-LS1-T-MN-B) transmitters
•
UTP data rate >40Mbps (300m)
•
Based on cable quality, cable pairs used (1, 2, or 4 pairs) and voltage
applied to cable (48~57VDC) from headend, PoE and PoE+ are supported
by PoW up to 400m
•
Over current and short circuit protection
•
Unique PoW transmission protection design so that no power is output
when the transmitter end is not connected
Downloads
Full specifications, features and additional information can be found on the
KBC website:
