Kaye ValProbe RT, Руководство пользователя

Страница: 95 / 168

Chapter 8 : Viewing Live Data
Kaye ValProbe RT User Manual 82
8.5. Check Communications Connections
On any of the live data monitoring screens, you can check your communications connections
by pressing
Hardware . On the Hardware screen, each hardware item (Kaye equipment) is
displayed with a communications link.
Figure 91: Hardware Screen
A Device Not Found status (gray line) indicates that the hardware is not communicating and
may not be connected properly.
Each hardware item has equipment-specific information which is displayed by pressing the
respective icons.
Select the ValProbe RT unit graphic to display physical information about the Validator. The
information displayed includes the Validator serial number, the date the Validator was last
calibrated, the setup that is currently loaded into the Validator, and the version number of the
Validator firmware.
For each Logger, the Logger serial number, Logger type, and the Logger calibration date are
displayed.
Select the temperature reference graphic to view the model and version.
Note: The current temperature reading of the reference is displayed. By entering a value into
the set field and pressing Set Temperature you can set a bath to a new target
temperature.
Select the IRTD1 or IRTD2 graphic to view information on the address, probe ID, label
(including the serial number), calibration date, user label, and temperature scale.
Note: The current temperature reading of connected IRTDs is displayed.
If the link to the Kaye ValProbe RT is not responding, all links are marked with a gray image of
device.