![background image](http://html1.mh-extra.com/html/kawai/mp7se/mp7se_owners-manual_3984448049.webp)
49
ED
IT
M
en
u
EDIT Menu parameters
(INT mode)
6
Controllers
1. Damper Pedal
o
n
, o
ff
This parameter determines whether or not the included F-10H
damper pedal is active for the selected sound.
* For more information about connecting pedals, please refer to page 17.
2. Damper Pedal Assign
28
functions
(
main
)
18
functions
(
sub
)
This parameter selects the function assigned to the included
F-10H damper pedal.
* This parameter is common for all four zones.
3. Damper Pedal Mode
n
ormal
, H
old
This parameter determines whether or not the damper pedal
should sustain sounds indefinitely without decay.
4. Pitch Bend
o
n
, o
ff
This parameter determines whether or not the pitch bend
wheel is active for the selected sound.
5. Pitch Bend Range
value
: 0 ~ 7
This parameter sets the range of the pitch bend wheel in semi-
tone steps.
* The range differs for INT mode (0 ~7) and EXT mode (0~12).
6. Soft Pedal Depth
value
: 1 ~ 10
This parameter adjusts the effectiveness (i.e. depth/strength) of
the soft pedal.
7. Modulation Wheel
o
n
, r
everse
, o
ff
This parameter determines whether or not the modulation
wheel is active for the selected sound.
When set to ‘Reverse’, the wheel’s output values will be inverted.
8. Modulation Wheel Assign
28
functions
(
main
)
18
functions
(
sub
)
This parameter selects the function assigned to the MP7SE’s
modulation wheel.
9. Modulation Depth Range
value
: 0 ~ 127
This parameter sets the range of the pitch modulation function
in steps of 600/127 cents.
10. SW1 Button
o
n
, o
ff
This parameter determines whether or not the SW1 button is
active for the selected sound.
11. SW1 Button Assign
10
functions
This parameter selects the function assigned to the SW1 button.
* This parameter is common for all four zones.
12. SW2 Button
o
n
, o
ff
This parameter determines whether or not the SW2 button is
active for the selected sound.
13. SW2 Button Assign
10
functions
This parameter selects the function assigned to the SW2 button.
* This parameter is common for all four zones.