Kawai ANYTIMEX3, Руководство пользователя

Страница: 74 / 166

74
Music S
cr
een
USB Memory Player
2. Tap the [A-B Repeat] button again to specify the end point of
the loop.
A “B” symbol will appear above the button, and the defined
section will be repeated continuously.
3. Tap the [A-B Repeat] button again to cancel the repeat
function.
The song/audio file will resume normal playback.
„ „
Overdubbing a song/audio file
The Overdubbing function allows the selected audio file to be recorded to a separate MP3/WAV audio file, while also recording any
notes played. This function can also be used to convert a song recorded to internal memory in Sound mode, or a song loaded from
USB memory, to an MP3/WAV audio file. In addition, the LINE IN audio and Bluetooth Audio (if connected) will also be mixed and
recorded to the MP3/WAV audio file.
* This function will only be visible when a USB memory device is connected to this instrument.
1. Tap the [Overdubbing Start/Stop] button.
The Overdubbing function will enter Standby mode.
* Press and hold the [Overdubbing Start/Stop] button to cancel the
Standby mode.
2. Press a key on the keyboard, or tap the [Overdubbing Start/
Stop] button again.
The [Overdubbing Start/Stop] button will change colour, and
the overdubbing will start.
A-B Repeat button
“B” symbol
Overdubbing Start/Stop
button
Overdubbing Start/Stop
button