KaVo SMARTair FLEXspace, Инструкция по эксплуатации

Страница: 26 / 46

6 Operation
6.1 Automatically operate the SMARTair (plus) FLEXspace
GAS
DIN DVG W
SMARTair
I
Note
Automatic mode is recommended for units that have an electrical connection.
Set the SMARTair (plus) FLEXspace plus to automatic
▶ Switch the power switch ② to "On".
▶ Press the "Automatic“ ③ key until the "Automatic" LED ①shines.
In the "Automatic" position, the SMARTair (plus) FLEXspace mobile is auto‐
matically turned on and off together with the connected unit.
Turn the SMARTair (plus) FLEXspace on and off
▶ Turn the unit on.
The SMARTair (plus) FLEXspace also runs automatically.
▶ Turn off the unit.
The SMARTair (plus) FLEXspace runs for a few seconds, and then independ‐
ently shuts off.
See also: 6.6 Setting the response sensitivity, Page 28
Instructions for use SMARTair/plus FLEXspace Typ 5230/5231
6 Operation | 6.1 Automatically operate the SMARTair (plus) FLEXspace
24/42