KaVo Scan eXam One Скачать руководство пользователя страница 46

Страница: 46 / 73

6 Installation of the imaging plate system

KaVo Scan eXam One

Turn the unit on by pressing the power ON/OFF

button before installing the software.

Insert the software installation media (DVD) and

launch the software installer if it does not start

automatically.

Read the software installation manual. Follow the

instructions of the installation wizard to complete

the software installation. Refer the software

installation manual for details.

6.4 Accessing the unit from the

software

In order to operate the scanner unit from a PC the

software needs to access the desired scanner unit

in the network. There can be multiple scanners in

one network. When using multiple scanners each

unit can be assigned a unique call name by the user

to separate the scanners in the network. By default

the name of the scanner unit is “Scan eXam™

One”.

There are multiple ways of configuring the

connection between the scanner unit and the

operators software. The automatic connection is

based on automatically detecting the scanner in the

network. This is a preferred method.

6.4.1 Direct connection method (uses

the unit s/n)

NOTICE!

It may not be possible to connect the unit

to the PC using the direct connection method if

another device is al ready connected to the PC

using direct connection. If the direct connection

field is not active (greyed out) or the system does

not work correctly after the unit has been

connected, reconnect the unit using the imaging

plate connection method.

1. After positioning the unit connect it to the PC(s)

in the local area network using the Ethernet ca-

ble (not included in delivery).

2. Switch the unit on. The imaging application soft-

ware symbol appears in the unit user interface.

This indicates that the unit is not communicating

with the PC(s)

in the network.

Approved:

Reviewed: Jalkanen Joni 2017-02-13 16:00

Reviewed

See PDM system to determine the status of this document. Printed out: 2017-03-17 10:35:17

D510414, 5

Содержание Scan eXam One










































































Результаты поиска

Содержание Scan eXam One

Отзывы:

Похожие инструкции для Scan eXam One

Бренды по названию

Популярные бренды

KaVo Scan eXam One, Руководство пользователя

Результаты поиска

Содержание Scan eXam One

Отзывы:

Похожие инструкции для Scan eXam One

Бренды по названию

Популярные бренды