KaVo ProXam iOS, Инструкция по эксплуатации

Страница: 81 / 130

3. Click the model where you want the measurement to end.
The 3D measurements are shown in the object browser under
Measurements.
11.5.2 Tooth width measurement
About this task
Follow these instructions to take a tooth width measurement.
Steps
1. Click the Tooth width measurement tool.
2. Click a numbered tooth on the chart.
In the upper jaw start from the posterior right side, in the lower jaw start
from the posterior left side.
3. Click the distal and mesial side of the tooth.
The next tooth is automatically selected from the chart.
•
To skip a tooth, click on another tooth on the chart.
• To re-measure a tooth, click it on the chart.
11 Analyse tab
Instructions for use KaVo ProXam iOS 75