KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Руководство по обслуживанию, Страница: 115 / 192

6 The s2terminal and service functions
107
6.2 s2terminal commands
These commands allow images to be downloaded directly
from the unit memory and the unit reserved if more than
one client (an s2terminal or driver in the same PC or
another PC) is connected to the unit. Additional commands
(under help) allow firmware to be updated.
---- S2 Terminal Help --------------------------------------
------------------------------------------------------------------
Downloading raw images - xi
1. Disable (no image capture) or close the dental imaging
program in the PC(s) connected to the unit to ensure that
the s2terminal has reserved the unit.
2. In the main
s2terminal
folder create a subfolder named
imageseries
.
3. Key in
xi
and press
ENTER
.
The last image taken by the unit will be downloaded from
the unit memory into the folder.
Image will be saved in DCM (DICOM) format. The saved
image can be opened with the dental imaging software or
image viewers such as
ImageJ
or
IrfanView
.
Note! If the unit was switched off after the last image was
taken the image will be lost.
Reserving the unit - xr
If you wish to take an image with the dental imaging
software while the s2terminal is running you must release
the s2terminal and reserve the dental imaging software.
1. Key in
xr
and then press
ENTER
.
------------------------------------------------------------------
xh help
xi receive image from the device
xr reserve device
xq quit
xr