KaVo KEY Laser 3+ 1343 Скачать руководство пользователя

Страница: 61 / 80

Setup methods according to DIN EN ISO 17664

The instructions on cleaning and sterilisation were validated by the manufacturer of

the medical device as suitable for preparation. The individual preparing the devices

is responsible for the preparation facility achieving the desired results. Normally,

validation and routine monitoring of the process are required. Likewise, any devia‐

tion from the instructions by the person preparing the device should be carefully

checked to see if it is effective, and potential negative consequences should be

evaluated.

Note
Frequently setting up does not substantially influence the product. The product life

normally ends due to wear and damage from use.

Note
All handpieces must be prepared. Preparation (cleaning) should be carried out di‐

rectly after each use.

CAUTION

Product damage from improper disinfection

Malfunctions.

▶ Use disinfectant in accordance with manufacturer's instructions.

▶ Only disinfect by wiping.

▶ Do not immerse product or product parts in liquids.

Note
Only when the device is turned off.

When cleaning, make sure that no liquid enters the device since it can cause mal‐

functions.

Note
Directly spraying switches such as key-operated switches can cause long-term

contact problems. In such locations, it is better to spray a cloth with disinfectant

and wipe the site to be disinfected.

Note
In general, make sure only to use disinfectants that are approved for use on painted

and plastic surfaces in dental and medical environments.

Note
The methods to prepare the laser handpieces can be found in the instructions for

use for the laser handpieces.

Damage to cushion and the paint surfaces as well as plastics can arise from the

wide variety of medicines and chemicals used in the dentist's practice.

Tests have shown that no one hundred percent surface protection can be found for

all materials that are available in the marketplace.

Instructions for use KEY Laser 3+ 1343 KEY Laser III 1243 upgraded
5 Setup methods according to DIN EN ISO 17664 | 4.19 System menu

59/76

Содержание KEY Laser 3+ 1343

















































































Результаты поиска

Содержание KEY Laser 3+ 1343

Отзывы:

Похожие инструкции для KEY Laser 3+ 1343

Бренды по названию

Популярные бренды

KaVo KEY Laser 3+ 1343, Инструкция по эксплуатации

Результаты поиска

Содержание KEY Laser 3+ 1343

Отзывы:

Похожие инструкции для KEY Laser 3+ 1343

Бренды по названию

Популярные бренды