KaVo KEY Laser 3+ 1343 Скачать руководство пользователя | Manualshive

Страница: 16 / 80

background image

International (EU)

For country-specific information on disposal, contact your dental supplier.

2.3.3

Personal eye protection

All of the persons that are in the range of the laser during treatment must wear laser

safety goggles. The laser safety goggles must be in conformance with safety level

L3 (DIN EN 207), wavelength 2.94 µm.

See also: 7 Accessories, Page 66

CAUTION

Laser beam hazard

Irreversible eye damage.

▶ Observe the instructions accompanying the laser safety goggles.

▶ Do not activate the laser when the handpiece is not mounted.

▶ Never look into the distal end of the handpiece, laser hose coupling or the laser

hose, either with or without the laser safety goggles!

2.3.4

Safety of the construction

The KEY Laser 3+ / III upgraded was constructed according to the relevant safety

standards such as

IEC 60601-1, IEC 60825-1 and VDE 0837 .

Numerous measures have been undertaken to ensure both active safety with sub‐

stantial comfort during use.

The user will not be directly aware of many of these measures:

▪ Directly after turning the device on, the microprocessor control will run a self-

check.

▪ Then a series of safety-relevant components will be operated and tested. If the

test is unsuccessful, the device will turn off again.

▪ If the test is successful, the device will go to standby mode.

▪ During operation, the proper functioning of the microprocessor control and all

safety-relevant components is continuously checked.

▪ Maximum value was placed on preventing the malfunctioning of individual com‐

ponents from endangering the physician, dental personnel, patients, or third

parties.

2.3.5

Electromagnetic compatibility

Note
Based on EN 60601-1-2 concerning the electromagnetic compatibility of electro‐

medical devices, the following should be noted:

• Medical electrical devices are subject to special measures regarding electromag‐

netic compatibility and must be operated in accordance with KaVo assembly in‐

structions.

• Portable and mobile high-frequency communications devices can influence elec‐

trical medical devices.

- Further details on the technical EMC description can be made available on re‐

quest.

Instructions for use KEY Laser 3+ 1343 KEY Laser III 1243 upgraded
2 Safety | 2.3 Safe use

14/76

«
...
14
15
16
17
18
...
»

Содержание KEY Laser 3+ 1343

















































































Отзывы:

Нет отзывов

Похожие инструкции для KEY Laser 3+ 1343

Бренд: Campbell Страницы: 18

Бренд: Vector Страницы: 4

Бренд: Gardena Страницы: 13

Бренд: Zenbooth Страницы: 60

Lab companion SI-300

Бренд: Jeio tech Страницы: 69

IP Video Test Option HST-3000

Бренд: JDS Uniphase Страницы: 4

Бренд: Jct Страницы: 16

Бренд: Landoll Страницы: 70

Бренд: Landice Страницы: 19

Бренд: Landice Страницы: 7

Бренд: Varimixer Страницы: 28

Бренд: ProLights Страницы: 28

Бренд: Zodiac Страницы: 32

LUNAQUA Classic LED

Бренд: Oase Страницы: 16

SimNewB Anomaly Set

Бренд: laerdal Страницы: 10

Ti-Lite Carbo AirBlock 351

Бренд: Harken Страницы: 2

GEH6000IL Series

Бренд: Zimmer Страницы: 67

Бренд: Otto Bock Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды