KaVo KEY Laser 3+ 1343 Скачать руководство пользователя

Страница: 13 / 80

Safety checks

Note
Make sure that the devices undergo regular annual safety checks and document

the results.

Information on the schedule and scope of the safety checks are in the assembly

instructions.

Requirements for correct operation

Responsibility is assumed for the safety, reliability and performance of the unit when:

▪ Installation, expansions, adjustments, changes or repairs must be done by tech‐

nicians trained by KaVo.

▪ Individuals have been assigned the responsibility of protecting the laser.

▪ The electrical system in the relevant room meets the requirements and regula‐

tions of VDE 0107 and VDE 0100.

▪ The unit is operated according to the instructions for use. All the provisions of

VDE 0751 are followed in maintenance.

This unit has been tested in accordance with:

▪ IEC 60601-1/VDE 0750 part 1

▪ ISO 7494

▪ IEC 60825-1 / VDE 0837 part 1

▪ VDE 0750 part 2-22

2.3

Safe use

2.3.1

General Safety Instructions

CAUTION

Malfunctions due to electromagnetic fields.

The product meets the applicable requirements regarding electromagnetic fields.

Given the complex interactions between equipment and cell phones, the product

may be influenced by a cell phone that is in use.

▶ Do not use cell phones in medical offices, hospitals, or laboratories.

▶ Put electronic devices such as e.g. computer storage media, hearing aids etc.

down during operation!

The KaVo product is not permitted to be used in areas subject an explosion hazard.

The user must ensure that that the unit works properly and is in a satisfactory con‐

dition before each use.

CAUTION

Danger from damaged operating parts

When operating parts are damaged, they may not be used.

Instructions for use KEY Laser 3+ 1343 KEY Laser III 1243 upgraded
2 Safety | 2.3 Safe use

11/76

Содержание KEY Laser 3+ 1343

















































































Результаты поиска

Содержание KEY Laser 3+ 1343

Отзывы:

Похожие инструкции для KEY Laser 3+ 1343

Бренды по названию

Популярные бренды

KaVo KEY Laser 3+ 1343, Инструкция по эксплуатации

Результаты поиска

Содержание KEY Laser 3+ 1343

Отзывы:

Похожие инструкции для KEY Laser 3+ 1343

Бренды по названию

Популярные бренды