KaVo Globus 1078 S Скачать руководство пользователя страница 54

Страница: 54 / 79

▶ Press the foot pedal several times when the instrument is mounted until the

desired level is displayed.

Memospeed Display

① Level display

② Time

If stored values are changed during operation, these changed values will be lost

when the unit is switched off and back on again. Only permanently stored values

remain intact.

4.8.3

Using the turbine

Note
Follow the instructions for use and assembly in the instrument packaging.

The following settings can be changed:

▪ Speed

▪ cold light intensity

Adjust the turbine with Memospeed

▶ Pull the swing arm forward until the actuation of the holder switch can be heard.

Setting the speed

Note
The speed can be set at level E only with the foot pedal.

Two modes are available:

▪ Manual mode: The speed can be adjusted gradually using the foot pedal.

Speed: 160,000 RPM (left stop) to 300,000 RPM (right stop)

▪ "Maximum" mode: The speed remains at the maximum level independent of the

foot pedal setting.

Instructions for use Globus 1078 S
4 Operation | 4.8 Using instruments

52/75

Содержание Globus 1078 S
















































































Результаты поиска

Содержание Globus 1078 S

Отзывы:

Бренды по названию

Популярные бренды

KaVo Globus 1078 S, Инструкция по эксплуатации

Результаты поиска

Содержание Globus 1078 S

Отзывы:

Бренды по названию

Популярные бренды